Blog

Controlled heating around the inner edge of refrigeration system enclosure doors is useful in several industrial applications. Using a tubular heater can improve the refrigeration unit doors’ ability to de-ice. Every door on the refrigeration unit has a channel that permits forced, warm airflow. As a result, the usage of tubular heaters in the refrigeration sector and its numerous benefits will be in this blog article.

Tubular Heaters: What Are They?

The resistive wire spiral that makes up the tubular electric heater is crushed and shielded by a metallic covering. Depending on the required amount of heat and the accessible area, tubular heating elements can be molded into a variety of shapes during annealing.

To enable regular use of the electrical heating pipe in the cooling equipment, a specially made rubber pressing seal is applicable to both terminals of the pipe after it has shrunk. The tube may also be shaped into any shape that the buyer wants.
Air, liquids, gasses, and surfaces can all be heat by tubular heating elements via radiation, conduction, or convection. It is feasible to create and produce tubular components with exceptional heat transfer performance that precisely meet the requirements of each application.

Why to use Tubular Heater?

Applying heat around the refrigerator door’s edges helps them freeze. Heat trace cable is often present by fastening it to the innermost layer of the door frame. Therefore, it generates a small amount of heat, which helps keep the doors from icing over or fogging over from frequent opening and closing.

For this application, it is standard operating procedure, used in food and beverage, medical, power, scientific, and transportation industries, among other areas.

Heat Application in the Refrigeration Sector

The use of blown, electric heat to refrigerator doors is among the most noteworthy and unique uses we have encountered.

How Tubular Heaters Are Useful in Refrigeration Applications

The narrative does not, however, finish here. There is now a more efficient way to de-ice refrigerator doors using a tubular heating source.

The innovative design places an airflow tunnel inside the door frame, through which hot air is present. The door frame was formerly lined with heat trace wire, however an airflow tunnel is now present. Additionally, we may work with the client to create a specially designed tubular heater that can fit inside the limited area of your particular design.

The Benefits of the Updated and Enhanced Design

The new, improved design has resulted in a considerable reduction in refrigerator door maintenance costs. A more consistent gate temperature reduces the amount of time needed to defog the doors significantly. In the event of a heater malfunction, it might be possible to replace the tubular element more quickly and with less effort than the heat trace wire.

Conclusion

Built from the highest quality materials, tubular heating components have a wide range of industrial uses. Also, immersion tubular heater continue to offer extended service for the general industry while meeting the demands and challenges of both space technology and the stringent requirements of nuclear power plants.